Search


Pelican case for iEQ45

I use a Pelican 1560 case for my iOptron iEQ45 mount.  It is pluck and pull foam and this is how I  have it laid out.  You can see that everything associated with the mount head fits.  There are additional cables under the mount itself.  I used some 3M Super 77 spray adhesive to glue the layers together and provide a little more support as seen on a website.  I made the mistake getting clue on the exposed surfaces.  Don't do that as it remains tacky and gets on the mount.  It will come off, but it is just a pain to clean.

 

Pelican case 1560 with iOptron iEQ45